[maxbutton id="1"]

Welder/Fabricator – Danville \ Cannon St.

  SUMMARY DESCRIPTION: The employee in this position must enjoy working with their hands have an eye for detail and an analytical mind. In addition you must be able to use variety of tools and equipment, ability to read blueprints, recognize welding symbols and specifications. You must also prepare, fabricate, and weld various constructions, components and structures from patterns and blueprints using a variety of tools and machines to make metal parts or assemble components. The employee will be required to assist maintenance staff on repairs and routine maintenance of different types of equipment and machinery as well.   DUTIES: 

1. Be able to read and interpret blueprints and engineering plans
2. Fabricate Metal Objects by laying out, cutting, and fitting, measuring and welding metals to create the desired shape or object.
3. Constantly inspect and test welds and equipment for durability.
4. Perform detailed quality checks to ensure that it meets all standards and requirements. Document work and results, and keep records or labor and materials used.
5. Use a variety of tools to work with metal. Operate cutting saws to cut various metals, and weld and grind and grand fabricated structures to meet structural requirements.

    ESSENTIAL QUALIFICATIONS:

1. Ability to understand oral and written instructions of a technical nature.
2. Ability to operate different tools, and to troubleshoot equipment problems
3. Good interpersonal and teamwork skills
4. The endurance to stand for approximately 7.5 hours or more each day
5. The strength and flexibility to lift and move up to 50 to 75 pounds manually
6. The ability and willingness to follow directions
7. Ability to use a mig welder and torch. Ability to stick weld is a plus.
8. Valid Driver’s license

    EXPERIENCE NEEDED:

1. Welding experience or AWS certification
2. Fabrication experience

 

[maxbutton id="1"]

Incoming Quality Inspector - Illini Castings

  SUMMARY DESCRIPTION: Quality Welding Tech for Illini Castings, LLC will be in charge of overseeing all aspects of quality control on the reconditioning process of couplers, yokes, bolsters and side frames along with any further applicable reconditioned materials. Quality Welding tech participates in scheduled and unscheduled inspections to verify that products, at various stages of processing, conform to the requirements as defined by the customer and/or internal requirements.   DUTIES: 1. Required to learn and follow current QA Manual along with the guidelines of the AAR M-1003 Certification and M-212/M-214 while being able to update any new standards and practices released by the AAR. 2. Required to train new employees on the QA practices of Illini Castings under the guidance of Director of Operations and additional Management. 3. Required to prepare for and execute all AAR audits along with necessary adjustments to any particular findings.   REQUIREMENTS: 1. Calipers, Micrometers, Tape Measure / Steel Rule, Depth Gages and Surface Finish Gages. 2. Understands sense of urgency 3. Calculator (perform basic functions) 4. Must be able to interpret and comprehend the following: 5. Mechanical drawings and specifications 6. Software / Database: MS Office (Word, Excel, Outlook), E2 (ERP System), PC-DMIS & Quick Measure   RESPONSIBILITIES: 1. Adhere to all safety protocols, to all quality system requirements and to all environmental requirements

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/83261fe8-5ec5-42fe-8ef5-4e56d2092abd"]

Class A CDL driver – Decatur

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="1"]

Equipment Maintenance Apprentice – Danville IL Cannon St.

  SUMMARY DESCRIPTION: This job requires the employee to assist mechanics on repairs heavy equipment used in the processing and transport of scrap metals. It is imperative to this position that the employee be physically able to lift or move up to 100 pounds. It is part of the essential functions of the job that the maintenance Apprentice will be able to climb on/into heavy machinery.   DUTIES:

1. Assist with routine repairs.
2. Diagnose and make routine repairs of our heavy equipment.
3. Weld parts as necessary.
4. Replace parts and components when necessary to rebuild units at regular intervals.
5. Operate the machine’s controls to perform the designated task within the machine’s capabilities.…
6. Recognize the machine’s limitations to work safely in a large variety of job situations.
7. Recognize operational control problems and coordinate their repair with supervisor.
8. Test equipment to check operation.

    ESSENTIAL QUALIFICATIONS:

1. Unblemished work and attendance record
2. Ability to work safely alone in highly congested areas.
3. The ability to use hand tools and trade type tools.
4. The strength and dexterity to lift and move 50-100 pounds manually in the maintenance of equipment.
5. The agility and flexibility to climb on the various machine areas to grease/clean or repair the machine components..
6. The ability and willingness to follow directions.
7. The ability to work together with other employees as a team.
8. Driver’s license required.

    Specific Skills:

1. Must be alert at all times
2. The ability to recognize potential hazards

     

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/a3149072-6b32-476b-932f-341056fe5644" ]

Class A CDL Driver – Danville IL

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="1"]

Heavy Equipment Mechanic – Danville \ Cannon St.

  SUMMARY DESCRIPTION: Responsible for repairs and preventative maintenance of various types of heavy equipment including OTR trucks, roll off containers, electrical systems on all mobile equipment used in the scrap metal recycling yard. The employee will also assist other maintenance staff when needed.   DUTIES: • Diagnosing, repairing engines, hydraulic systems, electrical, brakes, routine maintenance. • Replace parts and components when necessary to rebuild units at regular intervals. • Weld/fabricate as necessary. • Operate the machine’s controls to perform the designated task within the machine’s capabilities. • Recognize the machine’s limitations to work safely in a large variety of job situations. • Recognize operational control problems and coordinate their repair with the supervisor. • Train and assist the operators in the routine care of the machines. • Test equipment to check operation.   ESSENTIAL QUALIFICATIONS: • Ability to work safely alone in highly congested areas. • The ability to use hand tools and trade type tools. • The strength and dexterity to lift and move 50-75 pounds manually in the maintenance of equipment. • The agility and flexibility to climb on the various machine areas to grease and clean and repair the machine components. • Experience repairing and servicing heavy equipment is required. • Class B CDL a plus.    

[maxbutton id="1"]

AP Clerk - Corporate Danville IL

  SUMMARY DESCRIPTION: The employee in this position will perform a variety of office functions. The Accounts Payable Clerk will perform clerical duties and ensure accuracy of financial records. This position is responsible for reconciling accounts, ensuring prompt payment of company invoices while working within the comprehensive financial filling system for our company. The employee reports directly to the Accounting Manager and will work approximately 40 hours per week.   JOB DUTIES:

1. Properly code and enter all bills and invoices for payment to ensure proper billing across accounts.
2. Ensure appropriate processing of invoices by matching them with submitted Purchase Orders.
3. Responsible for maintaining and reconciling all expense reports for company authorized credit cards.
4. Ensure proper closing of all Purchase Orders through accounting system to ensure payment has been made.
5. Reconcile payable reports each month to confirm that all amounts paid were accurate.
6. Work with internal staff on issues related to outstanding or incorrect invoices.
7. Reconciliation bills to ensure billing to appropriate accounts.

    ESSENTIAL QUALIFICATIONS:

1. Unblemished work and attendance record.
2. Excellent communication and administrative skills.
3. The ability to work together with other employees as a team.
4. High degree of competency in accounting and computer functions.
5. Strong knowledge of MS Office.
6. Ability to meet all assigned deadlines.
7. Exceptional organization and time management skills.
8. Knowledge of manufacturing a plus.

    SPECIFIC SKILLS:

1. Good mathematics ability
2. Good financial analytical skills
3. The ability to reconcile accounts

    EXPERIENCE NEEDED:

1. Prior financial experience preferred
2. HS diploma required
3. Associate Degree in related field preferred

    PHYSICAL DEMANDS:

1. The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc.
2. Constantly operates a computer, and other office productivity machinery, such as calculator, copy machine, and computer printer.
3. Must be able to communicate verbally with customers, employees, and supervisors, both on the phone and in person.

 

[maxbutton id="1"]

MIG Welder - Illini Castings

  SUMMARY DESCRIPTION: This job requires the employee to work with our team in the yard as well as shipping and receiving. The employee will be inspecting incoming parts to determine if they are qualified for repair according to AAR inspections. This employee will also be required to train in different areas of the shop so that they may be moved when needed.   DUTIES:

1. Inspection of incoming parts to verify repair quality.
2. Assisting the yard with incoming parts for reconditioning
3. Cross training throughout the shop to be used where needed for production.
4. Housekeeping and any other duty specified by manager.

  ESSENTIAL QUALIFICATIONS:

1. Unblemished work and attendance record
2. The strength and flexibility to lift and move 50 pounds manually
3. The ability and willingness to follow directions
4. Efficiency and attention to detail
5. The ability to work together with other employees as a team

  SPECIFIC SKILLS:

1. Basic knowledge and ability to follow the safety requirements of the job
2. Willing to take on new responsibilities to grow within the company

  EXPERIENCE NEEDED:

1. Prior work as a welder/ grinder or fabrication manufacturing is preferred.
2. Prior work cutting with acetylene torch as well as air arc.
3. Prior work around heavy machinery.

  PHYSICAL DEMANDS:

1. Must be able to stand/walk constantly throughout a shift.
2. Must be able to stoop, bend, and kneel 65% of time.
3. Must be able to hear well enough to distinguish warning sounds or verbal instructions above loud noises.

  PHYSICAL DIMENSIONS:

1. The team member is frequently required to lift and carry, or to exert up to 50 pounds of force frequently
2. Must be able to bend, stoop, twist and turn occasionally
3. Applicants will be required to pass a physical job requirements test prior to hire.

  WORK ENVIRONMENT: While performing the essential functions of this job, the team member may be regularly exposed to loud noise, moving machinery parts, outdoor weather conditions and elements, airborne particles and fumes from gas, oil, grease, and welding arcs.